Observability Analysis Language

OAL(Observability Analysis Language) serves to analyze incoming data in streaming mode.

OAL focuses on metrics in Service, Service Instance and Endpoint. Therefore, the language is easy to learn and use.

Since 6.3, the OAL engine is embedded in OAP server runtime as oal-rt(OAL Runtime). OAL scripts are now found in the /config folder, and users could simply change and reboot the server to run them. However, the OAL script is a compiled language, and the OAL Runtime generates java codes dynamically.

You can open set SW_OAL_ENGINE_DEBUG=Y at system env to see which classes are generated.

Grammar

Scripts should be named *.oal

// Declare the metrics.
METRICS_NAME = from(CAST SCOPE.(* | [FIELD][,FIELD ...]))
[.filter(CAST FIELD OP [INT | STRING])]
.FUNCTION([PARAM][, PARAM ...])

// Disable hard code 
disable(METRICS_NAME);

From

The from statement defines the data source of this OAL expression.

Primary SCOPEs are Service, ServiceInstance, Endpoint, ServiceRelation, ServiceInstanceRelation, and EndpointRelation. There are also some secondary scopes which belong to a primary scope.

See Scope Definitions, where you can find all existing Scopes and Fields.

Filter

Use filter to build conditions for the value of fields by using field name and expression.

The expressions support linking by and, or and (...). The OPs support ==, !=, >, <, >=, <=, in [...] ,like %..., like ...% , like %...% , contain and not contain, with type detection based on field type. In the event of incompatibility, compile or code generation errors may be triggered.

Aggregation Function

The default functions are provided by the SkyWalking OAP core, and it is possible to implement additional functions.

Functions provided

longAvg. The avg of all input per scope entity. The input field must be a long.

instance_jvm_memory_max = from(ServiceInstanceJVMMemory.max).longAvg();

In this case, the input represents the request of each ServiceInstanceJVMMemory scope, and avg is based on field max.

doubleAvg. The avg of all input per scope entity. The input field must be a double.

instance_jvm_cpu = from(ServiceInstanceJVMCPU.usePercent).doubleAvg();

In this case, the input represents the request of each ServiceInstanceJVMCPU scope, and avg is based on field usePercent.

percent. The number or ratio is expressed as a fraction of 100, where the input matches with the condition.

endpoint_percent = from(Endpoint.*).percent(status == true);

In this case, all input represents requests of each endpoint, and the condition is endpoint.status == true.

rate. The rate expressed is as a fraction of 100, where the input matches with the condition.

browser_app_error_rate = from(BrowserAppTraffic.*).rate(trafficCategory == BrowserAppTrafficCategory.FIRST_ERROR, trafficCategory == BrowserAppTrafficCategory.NORMAL);

In this case, all input represents requests of each browser app traffic, the numerator condition is trafficCategory == BrowserAppTrafficCategory.FIRST_ERROR and denominator condition is trafficCategory == BrowserAppTrafficCategory.NORMAL. Parameter (1) is the numerator condition. Parameter (2) is the denominator condition.

count. The sum of calls per scope entity.

service_calls_sum = from(Service.*).count();

In this case, the number of calls of each service.

histogram. See Heatmap in WIKI.

service_heatmap = from(Service.latency).histogram(100, 20);

In this case, the thermodynamic heatmap of all incoming requests. Parameter (1) is the precision of latency calculation, such as in the above case, where 113ms and 193ms are considered the same in the 101-200ms group. Parameter (2) is the group amount. In the above case, 21(param value + 1) groups are 0-100ms, 101-200ms, … 1901-2000ms, 2000+ms

apdex. See Apdex in WIKI.

service_apdex = from(Service.latency).apdex(name, status);

In this case, the apdex score of each service. Parameter (1) is the service name, which reflects the Apdex threshold value loaded from service-apdex-threshold.yml in the config folder. Parameter (2) is the status of this request. The status(success/failure) reflects the Apdex calculation.

p99, p95, p90, p75, p50. See percentile in WIKI.

service_percentile = from(Service.latency).percentile(10);

percentile is the first multiple-value metric, which has been introduced since 7.0.0. As a metric with multiple values, it could be queried through the getMultipleLinearIntValues GraphQL query. In this case, see p99, p95, p90, p75, and p50 of all incoming requests. The parameter is precise to a latency at p99, such as in the above case, and 120ms and 124ms are considered to produce the same response time.

In this case, the p99 value of all incoming requests. The parameter is precise to a latency at p99, such as in the above case, and 120ms and 124ms are considered to produce the same response time.

Metrics name

The metrics name for storage implementor, alarm and query modules. The type inference is supported by core.

Group

All metrics data will be grouped by Scope.ID and min-level TimeBucket.

In the Endpoint scope, the Scope.ID is same as the Endpoint ID (i.e. the unique ID based on service and its endpoint).

Cast

Fields of source are static type. In some cases, the type required by the filter expression and aggregation function doesn’t match the type in the source, such as tag value in the source is String type, most aggregation calculation requires numeric.

Cast expression is provided to do so.

(str->long) or (long), cast string type into long.
(str->int) or (int), cast string type into int.

mq_consume_latency = from((str->long)Service.tag["transmission.latency"]).longAvg(); // the value of tag is string type.

Cast statement is supported in

From statement. from((cast)source.attre).
Filter expression. .filter((cast)tag["transmission.latency"] > 0)
Aggregation function parameter. .longAvg((cast)strField1== 1, (cast)strField2)

Disable

Disable is an advanced statement in OAL, which is only used in certain cases. Some of the aggregation and metrics are defined through core hard codes. Examples include segment and top_n_database_statement. This disable statement is designed to render them inactive. By default, none of them are disabled.

NOTICE, all disable statements should be in oal/disable.oal script file.

Examples

// Calculate p99 of both Endpoint1 and Endpoint2
endpoint_p99 = from(Endpoint.latency).filter(name in ("Endpoint1", "Endpoint2")).summary(0.99)

// Calculate p99 of Endpoint name started with `serv`
serv_Endpoint_p99 = from(Endpoint.latency).filter(name like "serv%").summary(0.99)

// Calculate the avg response time of each Endpoint
endpoint_resp_time = from(Endpoint.latency).avg()

// Calculate the p50, p75, p90, p95 and p99 of each Endpoint by 50 ms steps.
endpoint_percentile = from(Endpoint.latency).percentile(10)

// Calculate the percent of response status is true, for each service.
endpoint_success = from(Endpoint.*).filter(status == true).percent()

// Calculate the sum of response code in [404, 500, 503], for each service.
endpoint_abnormal = from(Endpoint.*).filter(httpResponseStatusCode in [404, 500, 503]).count()

// Calculate the sum of request type in [RequestType.RPC, RequestType.gRPC], for each service.
endpoint_rpc_calls_sum = from(Endpoint.*).filter(type in [RequestType.RPC, RequestType.gRPC]).count()

// Calculate the sum of endpoint name in ["/v1", "/v2"], for each service.
endpoint_url_sum = from(Endpoint.*).filter(name in ["/v1", "/v2"]).count()

// Calculate the sum of calls for each service.
endpoint_calls = from(Endpoint.*).count()

// Calculate the CPM with the GET method for each service.The value is made up with `tagKey:tagValue`.
// Option 1, use `tags contain`.
service_cpm_http_get = from(Service.*).filter(tags contain "http.method:GET").cpm()
// Option 2, use `tag[key]`.
service_cpm_http_get = from(Service.*).filter(tag["http.method"] == "GET").cpm();

// Calculate the CPM with the HTTP method except for the GET method for each service.The value is made up with `tagKey:tagValue`.
service_cpm_http_other = from(Service.*).filter(tags not contain "http.method:GET").cpm()

disable(segment);
disable(endpoint_relation_server_side);
disable(top_n_database_statement);

Edit this page