Alarm

Alarm core is driven by a collection of rules, which are defined in config/alarm-settings.yml. There are three parts in alarm rule definition.

  1. Alarm rules. They define how metrics alarm should be triggered and what conditions should be considered.
  2. Webhooks. The list of web service endpoints, which should be called after the alarm is triggered.
  3. gRPCHook. The host and port of the remote gRPC method, which should be called after the alarm is triggered.

Entity name

Defines the relation between scope and entity name.

  • Service: Service name
  • Instance: {Instance name} of {Service name}
  • Endpoint: {Endpoint name} in {Service name}
  • Database: Database service name
  • Service Relation: {Source service name} to {Dest service name}
  • Instance Relation: {Source instance name} of {Source service name} to {Dest instance name} of {Dest service name}
  • Endpoint Relation: {Source endpoint name} in {Source Service name} to {Dest endpoint name} in {Dest service name}

Rules

There are two types of rules: individual rules and composite rules. A composite rule is a combination of individual rules.

Individual rules

An alarm rule is made up of the following elements:

  • Rule name. A unique name shown in the alarm message. It must end with _rule.
  • Metrics name. This is also the metrics name in the OAL script. Only long, double, int types are supported. See the list of all potential metrics name. Events can be also configured as the source of alarm, please refer to the event doc for more details.
  • Include names. Entity names which are included in this rule. Please follow the entity name definitions.
  • Exclude names. Entity names which are excluded from this rule. Please follow the entity name definitions.
  • Include names regex. A regex that includes entity names. If both include-name list and include-name regex are set, both rules will take effect.
  • Exclude names regex. A regex that excludes entity names. If both exclude-name list and exclude-name regex are set, both rules will take effect.
  • Include labels. Metric labels which are included in this rule.
  • Exclude labels. Metric labels which are excluded from this rule.
  • Include labels regex. A regex that includes labels. If both include-label list and include-label regex are set, both rules will take effect.
  • Exclude labels regex. A regex that exclude labels. If both the exclude-label list and exclude-label regex are set, both rules will take effect.
  • Tags. Tags are key/value pairs that are attached to alarms. Tags are used to specify distinguishing attributes of alarms that are meaningful and relevant to users. If you would like to make these tags searchable on the SkyWalking UI, you may set the tag keys in core/default/searchableAlarmTags, or through system environment variable SW_SEARCHABLE_ALARM_TAG_KEYS. The key level is supported by default.

Label settings are required by the meter-system. They are used to store metrics from the label-system platform, such as Prometheus, Micrometer, etc. The four label settings mentioned above must implement LabeledValueHolder.

  • Threshold. The target value. For multiple-value metrics, such as percentile, the threshold is an array. It is described as: value1, value2, value3, value4, value5. Each value may serve as the threshold for each value of the metrics. Set the value to - if you do not wish to trigger the alarm by one or more of the values.
    For example in percentile, value1 is the threshold of P50, and -, -, value3, value4, value5 means that there is no threshold for P50 and P75 in the percentile alarm rule.
  • OP. The operator. It supports >, >=, <, <=, =. We welcome contributions of all OPs.
  • Period. The frequency for checking the alarm rule. This is a time window that corresponds to the backend deployment env time.
  • Count. Within a period window, if the number of times which value goes over the threshold (based on OP) reaches count, then an alarm will be sent.
  • Only as condition. Indicates if the rule can send notifications, or if it simply serves as an condition of the composite rule.
  • Silence period. After the alarm is triggered in Time-N, there will be silence during the TN -> TN + period. By default, it works in the same manner as period. The same alarm (having the same ID in the same metrics name) may only be triggered once within a period.

Composite rules

NOTE: Composite rules are only applicable to alarm rules targeting the same entity level, such as service-level alarm rules (service_percent_rule && service_resp_time_percentile_rule). Do not compose alarm rules of different entity levels, such as an alarm rule of the service metrics with another rule of the endpoint metrics.

A composite rule is made up of the following elements:

  • Rule name. A unique name shown in the alarm message. Must end with _rule.
  • Expression. Specifies how to compose rules, and supports &&, ||, and ().
  • Message. The notification message to be sent out when the rule is triggered.
  • Tags. Tags are key/value pairs that are attached to alarms. Tags are used to specify distinguishing attributes of alarms that are meaningful and relevant to users.
rules:
  # Rule unique name, must be ended with `_rule`.
  endpoint_percent_rule:
    # Metrics value need to be long, double or int
    metrics-name: endpoint_percent
    threshold: 75
    op: <
    # The length of time to evaluate the metrics
    period: 10
    # How many times after the metrics match the condition, will trigger alarm
    count: 3
    # How many times of checks, the alarm keeps silence after alarm triggered, default as same as period.
    silence-period: 10
    # Specify if the rule can send notification or just as an condition of composite rule
    only-as-condition: false
    tags:
      level: WARNING
  service_percent_rule:
    metrics-name: service_percent
    # [Optional] Default, match all services in this metrics
    include-names:
      - service_a
      - service_b
    exclude-names:
      - service_c
    # Single value metrics threshold.
    threshold: 85
    op: <
    period: 10
    count: 4
    only-as-condition: false
  service_resp_time_percentile_rule:
    # Metrics value need to be long, double or int
    metrics-name: service_percentile
    op: ">"
    # Multiple value metrics threshold. Thresholds for P50, P75, P90, P95, P99.
    threshold: 1000,1000,1000,1000,1000
    period: 10
    count: 3
    silence-period: 5
    message: Percentile response time of service {name} alarm in 3 minutes of last 10 minutes, due to more than one condition of p50 > 1000, p75 > 1000, p90 > 1000, p95 > 1000, p99 > 1000
    only-as-condition: false
  meter_service_status_code_rule:
    metrics-name: meter_status_code
    exclude-labels:
      - "200"
    op: ">"
    threshold: 10
    period: 10
    count: 3
    silence-period: 5
    message: The request number of entity {name} non-200 status is more than expected.
    only-as-condition: false
composite-rules:
  comp_rule:
    # Must satisfied percent rule and resp time rule 
    expression: service_percent_rule && service_resp_time_percentile_rule
    message: Service {name} successful rate is less than 80% and P50 of response time is over 1000ms
    tags:
      level: CRITICAL

Default alarm rules

For convenience’s sake, we have provided a default alarm-setting.yml in our release. It includes the following rules:

  1. Service average response time over 1s in the last 3 minutes.
  2. Service success rate lower than 80% in the last 2 minutes.
  3. Percentile of service response time over 1s in the last 3 minutes
  4. Service Instance average response time over 1s in the last 2 minutes, and the instance name matches the regex.
  5. Endpoint average response time over 1s in the last 2 minutes.
  6. Database access average response time over 1s in the last 2 minutes.
  7. Endpoint relation average response time over 1s in the last 2 minutes.

List of all potential metrics name

The metrics names are defined in the official OAL scripts and MAL scripts, the Event names can also serve as the metrics names, all possible event names can be also found in the Event doc.

Currently, metrics from the Service, Service Instance, Endpoint, Service Relation, Service Instance Relation, Endpoint Relation scopes could be used in Alarm, and the Database access scope is same as Service.

Submit an issue or a pull request if you want to support any other scopes in alarm.

Webhook

The Webhook requires the peer to be a web container. The alarm message will be sent through HTTP post by application/json content type. The JSON format is based on List<org.apache.skywalking.oap.server.core.alarm.AlarmMessage> with the following key information:

  • scopeId, scope. All scopes are defined in org.apache.skywalking.oap.server.core.source.DefaultScopeDefine.
  • name. Target scope entity name. Please follow the entity name definitions.
  • id0. The ID of the scope entity that matches with the name. When using the relation scope, it is the source entity ID.
  • id1. When using the relation scope, it is the destination entity ID. Otherwise, it is empty.
  • ruleName. The rule name configured in alarm-settings.yml.
  • alarmMessage. The alarm text message.
  • startTime. The alarm time measured in milliseconds, which occurs between the current time and the midnight of January 1, 1970 UTC.
  • tags. The tags configured in alarm-settings.yml.

See the following example:

[{
	"scopeId": 1, 
	"scope": "SERVICE",
	"name": "serviceA", 
	"id0": "12",  
	"id1": "",  
    "ruleName": "service_resp_time_rule",
	"alarmMessage": "alarmMessage xxxx",
	"startTime": 1560524171000,
    "tags": [{
        "key": "level",
        "value": "WARNING"
     }]
}, {
	"scopeId": 1,
	"scope": "SERVICE",
	"name": "serviceB",
	"id0": "23",
	"id1": "",
    "ruleName": "service_resp_time_rule",
	"alarmMessage": "alarmMessage yyy",
	"startTime": 1560524171000,
    "tags": [{
        "key": "level",
        "value": "CRITICAL"
    }]
}]

gRPCHook

The alarm message will be sent through remote gRPC method by Protobuf content type. The message contains key information which are defined in oap-server/server-alarm-plugin/src/main/proto/alarm-hook.proto.

Part of the protocol looks like this:

message AlarmMessage {
    int64 scopeId = 1;
    string scope = 2;
    string name = 3;
    string id0 = 4;
    string id1 = 5;
    string ruleName = 6;
    string alarmMessage = 7;
    int64 startTime = 8;
    AlarmTags tags = 9;
}

message AlarmTags {
    // String key, String value pair.
    repeated KeyStringValuePair data = 1;
}

message KeyStringValuePair {
    string key = 1;
    string value = 2;
}

Slack Chat Hook

Follow the Getting Started with Incoming Webhooks guide and create new Webhooks.

The alarm message will be sent through HTTP post by application/json content type if you have configured Slack Incoming Webhooks as follows:

slackHooks:
  textTemplate: |-
    {
      "type": "section",
      "text": {
        "type": "mrkdwn",
        "text": ":alarm_clock: *Apache Skywalking Alarm* \n **%s**."
      }
    }    
  webhooks:
    - https://hooks.slack.com/services/x/y/z

WeChat Hook

Note that only the WeChat Company Edition (WeCom) supports WebHooks. To use the WeChat WebHook, follow the Wechat Webhooks guide. The alarm message will be sent through HTTP post by application/json content type after you have set up Wechat Webhooks as follows:

wechatHooks:
  textTemplate: |-
    {
      "msgtype": "text",
      "text": {
        "content": "Apache SkyWalking Alarm: \n %s."
      }
    }    
  webhooks:
    - https://qyapi.weixin.qq.com/cgi-bin/webhook/send?key=dummy_key

Dingtalk Hook

Follow the Dingtalk Webhooks guide and create new Webhooks. For security purposes, you can config an optional secret for an individual webhook URL. The alarm message will be sent through HTTP post by application/json content type if you have configured Dingtalk Webhooks as follows:

dingtalkHooks:
  textTemplate: |-
    {
      "msgtype": "text",
      "text": {
        "content": "Apache SkyWalking Alarm: \n %s."
      }
    }    
  webhooks:
    - url: https://oapi.dingtalk.com/robot/send?access_token=dummy_token
      secret: dummysecret

Feishu Hook

Follow the Feishu Webhooks guide and create new Webhooks. For security purposes, you can config an optional secret for an individual webhook URL. If you would like to direct a text to a user, you can config ats which is the feishu’s user_id and separated by “,” . The alarm message will be sent through HTTP post by application/json content type if you have configured Feishu Webhooks as follows:

feishuHooks:
  textTemplate: |-
    {
      "msg_type": "text",
      "content": {
        "text": "Apache SkyWalking Alarm: \n %s."
      },
      "ats":"feishu_user_id_1,feishu_user_id_2"
    }    
  webhooks:
    - url: https://open.feishu.cn/open-apis/bot/v2/hook/dummy_token
      secret: dummysecret

Follow the WeLink Webhooks guide and create new Webhooks. The alarm message will be sent through HTTP post by application/json content type if you have configured WeLink Webhooks as follows:

welinkHooks:
  textTemplate: "Apache SkyWalking Alarm: \n %s."
  webhooks:
    # you may find your own client_id and client_secret in your app, below are dummy, need to change.
    - client_id: "dummy_client_id"
      client_secret: dummy_secret_key
      access_token_url: https://open.welink.huaweicloud.com/api/auth/v2/tickets
      message_url: https://open.welink.huaweicloud.com/api/welinkim/v1/im-service/chat/group-chat
      # if you send to multi group at a time, separate group_ids with commas, e.g. "123xx","456xx"
      group_ids: "dummy_group_id"
      # make a name you like for the robot, it will display in group
      robot_name: robot

Update the settings dynamically

Since 6.5.0, the alarm settings can be updated dynamically at runtime by Dynamic Configuration, which will override the settings in alarm-settings.yml.

In order to determine whether an alarm rule is triggered or not, SkyWalking needs to cache the metrics of a time window for each alarm rule. If any attribute (metrics-name, op, threshold, period, count, etc.) of a rule is changed, the sliding window will be destroyed and re-created, causing the alarm of this specific rule to restart again.